I've done this one in a plain drab scheme, and I haven't added any markings as yet because I'm not completely sure just how I'm going to use it. I have another (they come in a pack of two) which I intend to finish in a WW1 outlined three-colour disruptive pattern.
Thanks to the internet making it so cheap and easy to buy things from overseas, this new airbrush only cost me about $75. When I bought that Badger, it was near enough to $200, and that was in the mid-1970s; I'm not sure what that would be equivalent to now, but it would be a lot.
I elected to go for Paasche this time around because I'd used a couple of Paasche brushes at polytech, and found them generally smoother of action than my Badger 150. It meant having to fiddle around with thread converters to attach it to my compressor and what-not, but I thought it would be worth that small trouble.
Alas, this Paasche does not live up to the standard set by those I used at school. Its double-action air/paint trigger is rather abrupt, and quite difficult to use with any delicacy of touch. I've lubricated it as far as I can, but even so it's not nearly as smooth or gentle an action as the old Badger.
I'll see if I can polish them out, and we'll see if that makes any appreciable difference.
The new Paasche isn't wholly unsatisfactory, by any means. I do like its system for limiting paint flow, which is easier and more accurate to adjust than that of the Badger. The top-mounted gravity feed cup is more convenient for very small volumes of liquid too; there's less wastage as it doesn't need to keep a siphon working. I'm hopeful that if I can ameliorate the trigger action, it will prove to be a very useful tool.
Addendum:The Talon has become my default brush over the last couple of months, mainly because the gravity-feed makes it a breeze to clean, and being able to use just a few drops of paint at a time is very convenient. I ordered the super-fine (0.25mm) and heavy duty (0.66mm) heads and needles as well, and the .25mm needle has ended up being the one I use all the time. It is quite fragile though; I've already bent its tip once, and although I managed to get it straightened out again I don't think it will take too much more of that sort of abuse.
The trigger is still somewhat problematic, but I no longer think it's to do with the trigger itself, but with the return valve — it has a propensity to stick in the "on" position, especially if being used at low air pressures.
These are them, each with a front and back view. Ugly little suckers.
In 10mm scale they're huge and ogreish, naturally. In 28mm scale they're tiny, and would make good little goblins or something. In 15mm scale they're big, hefty dudes, a bit taller than your average 15mm figure, and definitely fatter, and it's in that scale that I intend to use them.
They're going to be my Brute Squad.
As I've mentioned before, I've been toying with using Warlord Games' Hail Caesar rules in a fantasy setting, and that's where I envisage using the Brute Squad. Not that they're all that fantastic; when it comes down to it they're just really big, mean dudes with sharp pointy things and a bad attitude. They're shock troops, so I'd give them a high Clash value, but not much staying-power — difficult to kill individually, but with brittle morale once they start falling.
Here'a another 1:100 scale (15mm) KV1 from Zvezda, a slightly later model than the previous one with a slightly better 76.2mm gun. ...
I've updated my D&D 5e DM Screen to include material from the DMG, and I also took the opportunity to fix a couple of errors tha...
Clickupon to embiggenate OK, so let's have a closer look at all of the figures off one sprue of the PSC 15mm WWII Russians. I'm ...
These finally arrived from Battlefront. They don't keep their online store stocking status up to date, and if one orders something a...